What are the different types of Nail Guns?

Will Barinas
Written by
Last update:

What is a nail gun?

Nail guns are one of the most popular tools used today because of the convenience factor for home improvement projects and car repairs. The use of a nail gun continues to gain in popularity because their ease of use and they’re safer alternatives to other tools.

It is always best practice when using a nail gun to use safety glasses; it is just good practice when working with any power tool. There are a couple of different types of nail guns which are:

Air-powered nailers

The name says it all, pneumatic nailers use compressed air to expel nails from the gun. Some manufacturers of pneumatic nailers include Hitachi, Bosch, Paslode, Porter Cable, and Bostitch. To use an air-powered nailer, the operator pulls the tool back, and then pushes it forward. It uses a piston mechanism to cock the tool and drive a nail. Air compressor or an air tank is required. Most pneumatic nailers will have a depth adjustment to allow the nailer to drive nails of different lengths. Some pneumatic nailers also have a function that allows the nailer to be used with sequential or contact fire.

8 Different Types of Nail Guns

Nail guns are used with a variety of materials, and with a variety of purposes. Nail guns have been in use in homes for many years, but the choices of nail gun models available to the consumer have also been increasing.

Not too long ago, there was only one type of nail gun, and it was powered by air. Now you can find nail guns that run on air, electricity, combustibles, pneumatic, and other sources of power to complete the same task. This is the main reason why there are different types of nail guns.

The following eight types of nail guns are currently available to the consumer. Each type uses a different type of power, but each type of nail gun has a unique function, which is why they are all different types of nail guns.

Framing Nail Gun

The framing nailer contains a secondary locking system that holds the gun open after each shot and this makes the reloading process much faster. It also comes with a long magazine which makes it a lot more practical for jobs which involve nailing large boards. It usually has a drive depth of 3 to 4 inches but you can get them with a deeper magazine as well.

The framing nailer is primarily used to nail together the frame of a building but the framing nailer is also used for nailing flooring, roofing, subfloors, trimwork and moldings. The nailer is usually run with 2 to 3 nails per second and thus can complete a variety of projects in a short time.

Finish Nail Gun

The Finish nail gun is specifically designed for finished installation. The construction nail guns are specifically designed for framing. The finish nail gun can be used on lighter gauge lumber, and is capable of 23-gauge nailers for exterior, and 12 gauge nailers for interior. The most common nail guns used with 23 gauge nailers are 18-gauge finish nails.

The construction nail gun is specifically created for framing. The construction nail gun can be used on both framing and exterior lumber. The construction nail gun is capable of 1-1/4 to 2-1/2-inch nails. The most common nail guns used for framing are 2-3/4 to 3-1/2-inch nailers.

The finish nail gun is a single action pneumatic tool that has a nail guide device, and multiple trigger setting. These nail guns are also equipped with some type of an actuation system, such as a thumb trigger, or else a finger trigger configuration. The finish nail guns are available in both 18-gauge and 23-gauge nail guns. The majority of these nail guns are smaller in size, and lighter in weight.

Brad Nail Gun

A brad nail gun makes use of a single length of brad nails, very thin nails that are ½” to ¼” long, and are used to nail thin pieces together. Brad nails are extremely sharp, which makes them great for joining materials such as thin wood veneers and laminates. While conventional nailers can be used for brad nail applications, a brad nail gun is really the superior choice for this job.

Roofing Nail Gun

Nail guns are an excellent addition to any home because they help with home improvement projects. If you are a homeowner, you can expect to use a nail gun at least once or twice. That’s why it’s worth it to learn about the different nail guns that are available. By knowing what each nail gun is good for, you can find a nail gun that works perfectly for your home improvement projects.

This is one of the most common nail guns that is used. The roofing nail gun shoots 2-inch to 3-1/2-inch nails. The main reason that this nail gun is great is because it is perfect for working on roofing and siding projects. It’s important to have a nail gun for these projects because the nails hold the materials in place. The roofing nail gun is strong enough to fasten plywood to rafters. The best part about this nail gun is that it fastens the materials to the rafter easily.

Pin Nail Gun

A pin nail gun is a type of nail gun that is only used for small trim work. With a pin nailer, you can drive tiny 4-8 penny head nails into your wood.

These pin nailers are designed for small projects and they are not as efficient as a finish nailer or a brad nailer. The main reason that people use a pin nail gun is because they run on air. They’re also cheaper than other types of nail guns.

The biggest disadvantages of a pin nailer is that they’re a little slower than other types of nail guns. And they also don’t hold a full magazine of nails (usually only holding between 10-40 pins).

Pin nailers are most commonly used for veneers, cabinet hardware, trim, moulding, and other small woodwork projects.

Flooring Nail Gun

The most common nail gun ” in a form of a flooring nail gun ” is used for nailing the laminates or wood or plywood to the floor. You just need to put it at an angle of 100o and then pull it back out. Sometimes the nail tip can be damaged if it hits a nailer. So its best that you just keep the speed to a number so that it is not damaged. When compared to the nails, this is much faster. It can save you both time and energy.

It has been designed to give you an easier time. It comes with a depth guide that is used to determine the depth.

The nails can be removed using a hammer but it will be a bit hard especially if you are on the floor. If you are working with a partner, then one person can hold the boards in place while the other fires the nails in. This will make it easier. This is one of the tools that will make the job a lot easier.

Palm Nail Gun

A palm nail gun is a handheld nail gun that’s lightweight and easy to use. This makes it a great tool for the occasional or amateur builder, especially those who will be working alone. For this reason, it’s also the best option to consider if you’re having trouble deciding between a palm nail gun and a standard pneumatic or cordless nail gun.

However, as useful as they are, palm nail guns do have some limitations. The biggest is their short range. This obviously makes them less desirable for your everyday builders than standard nail guns that offer more distance options. The range can also be awkward for smaller hands, and palm nail guns were never intended for prolonged use.

The one thing they do have going for them is that most of the palm nail guns are relatively inexpensive. So while they may lack some of the power and versatility of top of the line nail guns, they are a good option for those on a budget.

Siding Nail Gun

The Siding nail gun (commonly referred to as an “Siding Finishing Nailer”) is the right tool for finishing all around the exterior of a home, including those nooks and crannies that you can’t access with a regular nail gun. To get the job done properly with a siding finishing nailer, you need to know the common gaits for nails and the proper procedure for setting the nails.

Also, depending on how you choose to set up your siding gun, the whole process can be a little tricky. The siding nailer will have a limited range, so you’ll have to get close to any nail that you’re setting. Once you get used to working with the siding gun, you’ll be able to do this easily, but due to the limited range some people find that it’s difficult to set nails at first.

As you’re working, keep the gun level and the entire nailer parallel to the surface of the siding once you’ve set the nail. This will keep the gun from tipping at an angle, which can cause problems when you’re working close to smooth surfaces.

Power Sources of Nail Guns

The two main types of nail guns are pneumatic nail guns and electric nail guns. They both use compressed air to shoot the nail but work differently in terms of speed, power, and safety.

Electric Nail Guns

Electric nail guns are most commonly used by professionals who are driving nails into concrete or other surfaces where the nails need to be sunk into the material. The nail needs to penetrate the material at an angle, and the electric gun does this easily.

Electric nail guns are also suitable for people who do not have access to a compressor, and for applications that require a lighter touch – like applying nail polish on nails or attaching stickers and decals. Electric nail guns are less powerful than air nail guns.

Pneumatic Nail Guns

Pneumatic nail guns are used by hobbyists and people who want to drive nails on small projects. Air nail guns, like pneumatic nail guns, use air power to shoot nails through wood. Users like them because they do not require electricity to operate. The hose or tubing that connects the compressor and the air nail gun can be very long, making it easy to drive nails from a distance.

Cordless Nail Guns

If you don’t have an air compressor, a cordless nail gun is the perfect solution for nailing up hurricane shutters, repairing frames, trimming branches or shuttering. Some pistol types can also drive screws with bits included. You get a choice of firing modes, including single shot or sequential as well as the option to adjust the depth, which makes the nail guns easy for novices and experts alike.

Since a nail gun is electrically powered, you must use it at near-ground level and not try to pound nails upwards. The tip of the nail is sometimes square to fit into a recess milled into the wood, car frame, trim, etc. The most common types employ a spring-loaded magazine and one or two coils of wire for driving.

Electric Nail Guns

An electric nail gun is powered by an electric motor. The firing mechanism in an electric nail gun is an electric switch that turns current into kinetic energy to ignite the fasteners. Most nail guns are powered by 2AA batteries, which translate to more than 1,000 shots per set because the battery is on for only a fraction of a second at a time.

Generally, you can load an electric nail gun without gloved-hands, but try to keep your fingers away because they can get in the line of fire when you release the trigger. The best practice is to use gloves and keep them on while you load the gun.

Electric nail guns don’t take long to charge. They can be as small as 20 cubic inches and sport the power to drive the same size nail that takes 200 strokes with a manual gun. Some cordless models hold and discharge up to 100 nails, depending on the size of nail they shoot.

Pneumatic Nail Guns

Low-powered pneumatic nail guns are used for wood framing and other tasks for which the nails are driven into framing members that are attached to the subfloor. These are classified in several categories with a variety of head sizes (1.5 inches to 4 inches) and drives (straight, spiral, and round head) designed for both framing and finish work.

High-powered pneumatic nail guns are more often used in finish carpentry and detail work. They have thinner shanks, smaller heads and are more accurate. They use nails ranging from 2 to 3 inches long.

Electric Nail Guns

Electric nail guns use a piston that drives the nail into the surface to be nailed. This type of nail is most appropriately used for heavy materials such as concrete, polypropylene, and masonry.

These are often called "brad" guns due to the fact that their targets are thin sheets of wood. These guns can also drive nails into soft materials like wood, though they are designed for small jobs such as finishing trim.

They are relatively inexpensive, weighing only a few pounds and running on the power of a portable power source like a small generator or power pack. These are the types of nail guns that most DIYers first come in contact with.

Firing Method for Nail Guns

This is a new-age tool, meant to be used to install or join wood, fiberglass, foam-board, etc. without having to use the hammer. There are two types of nail guns, namely, the pneumatic nailers and the cordless nailers.

The pneumatic nailer uses a gas or air compressor for driving the nails while the cordless nail gun operates on electricity. The pneumatic nailers can fire up nails in a variety of materials but the cordless nail guns can’t do the same.

You could fire the pneumatic nailer into plywood, solid wood, OSB, insulation, fiberglass, laminated board, particle board, particle board, even MDF and thin metal. The nails used for these guns could vary from 2” to 3.5” nail sizes.

On the other hand, the cordless nailers can be used only to install nails in materials that can be handled on a battery. These are usually softwoods or natural woods. The nail size should be no more than 2” in length and one will get different nail styles to use with the battery nailer.

This tool is used by carpenters to join metal stud or sheet metal with nails, or to insert nails in hard to reach areas. You can run a variety of fasteners with it.

Benefits of Nail Guns

Nail guns, or as they are more commonly called, air powered nailers, drive nails into a variety of materials. Nail guns don’t use a hammer to pound the nail into the material instead an air powered piston drives the nail with an impact. The basic design of the tool looks like a gun. The barrel opens similar to a revolver, and the nail is placed into a chamber. Then the trigger is pulled and the piston drives the nail into the materials. The nail is held in place until the trigger is released.

The nail gun is extremely efficient. To drive a nail with a hammer takes a certain amount of force which varies according to how strong the person is. But when the nail gun is used, the force is always the same, regardless of the person using it. It also reduces the number of times the user has to hit the nail in order to drive it into the material.

Buying a nail gun can be confusing for the beginner. There are different types of nail guns available for different purposes. Before purchasing a nail gun, you should have a good idea of how and where you will be using it. Different nail guns are used for different projects.

Buying Guide of Nail Guns

In this post, you will learn everything you need to know about the different types and uses of nail gun tools and equipment.

Nails today can be viewed as disposable. Due to the fact that nails are so cheap when compared to the cost of time and money, a lot of contractors prefer to use a nail gun. There are four different forms of nail gun and each one offers their own unique benefit and convenience.

Pneumatic Nail Guns- As the most common and traditional nail gun for use, pneumatic nail guns are cordless nail guns, which means that they don’t need to be charged or plugged into a wall socket. They work on the principle of using a hammer to drive a piston forward. The piston then drives a spade against a pile of fasteners, and this will make it proceed forward. Pneumatic nail guns are used everywhere from construction sites to home improvement stores. They are able to drive in up to 18 nails per second.

Electric Nail Guns- When we think of nail guns, we usually think of pneumatic nail guns, but there are some other types of nail guns, and one of these is the electrical nail guns. An electric nail gun uses batteries or electricity to drive nails into wood. They tend to drive in smaller nails than pneumatic nail guns, which can range for using 18 gauge nails to smaller nails used in woodworking.

The power source of the nail gun :

Most nail guns have two separate power sources: compressed air or electric power.

A nail gun that uses compressed air is called a pneumatic nail gun. Pneumatic nail guns are powered by an air compressor, which can be rented at a number of different stores.

An electric nail gun is powered by an electric motor and uses electricity to power the nail gun.

Best Overall Nail Gun

First of all, nail guns are classified into two types based on where they drive the nails: contact type and sequential type. If you use the nail guns to perform the same task in succession, the nail guns are sequential nail guns. If you combine the nail guns with a driver, it is a contact nail gun.

Next, nail guns are also categorized by the type of nails they use. Among the types, there are combination type, solid type and wire type nail gun. You can find out what type of nails it uses by the type of materials in the body of the nail gun.

The last type is the usage of nail guns. For example, finish nail guns are used to spike the board materials. Roofing nail guns are designed for fixing shingles onto the roof. Decking nail guns are made for fixing the deck onto the floor.

This is what you should know about nail guns. Making sure you have the right nail gun is very important.

Bostitch F21PL

Replifying the look of the world's first machine nail gun, the Bostitch F21PL is made to endure the toughest pounding and pounding. It's ideal for building studs and roof sheathing, installing sub-flooring, and can also handle specialty projects like gluing and stapling plywood and paneling.

The Bostitch F21PL cordless, gasless, and battery-free nailer can help you complete projects efficiently because of its power and versatility. It features sequential triggers, which help to make sure you never miss a nail. All you need to do is squeeze the triggers alternately, and it will drive several nails. The sequential triggers let you work continuously and are ideal for when you're working alone.

The Bostitch F21PL is easy to use because it's lightweight and designed to be easy to handle. The body is compact, so it's the perfect choice for when you want to finish a project quickly without straining your muscles. It's also designed depending on the size of installation job. If you need to work on a project for hours, it's lightweight design will keep you comfortable.

Frequently Asked Questions

The following are some of the most frequently asked questions regarding nail guns and nail gun safety.

How many times could you shoot a nail gun? Do nail guns work only once?

A nail gun has the ability to shoot approximately 1000 nails over a span of 10 years. nail guns being made of metal do not work only once. They are rechargeable and make it possible to shoot one more nail. The number of nails shot from a nail gun is variable depending on the weight and length of the nails. However, to estimate, for years, along with using the nail gun for a long period, you can shoot 1000 nails approximately.

Do I have to remove nails while using the nail gun?

No. You don’t have to remove the nails being used in the nail gun. But you can remove it if you want.

How does a nail gun work?

A nail gun is a tool which helps to nail the wooden pieces together using the nail gun. The nail gun has the metal wires which help you to insert the nail.

Are there any difficulties in fixing the nail gun?

Nail guns are extremely easy to fix. Anyone can fix the nail gun if he follows the instructions given below.

Is the nail gun very heavy?

No. You can fix the nail gun easily even if the gun is heavy.

What is the best nail gun for home use?

Nail guns are the worlds fastest hammer. They shoot out little steel nails which are driven into wood (mostly), and strip out back through a rubber washer which springs the nail back into the holder. If you use a nail gun, you don’t have to use a hammer, and you can work up to 18 times faster than if you were hammering it in.

There are a number of different nail guns that have been designed for different types of projects, but all nail guns have the same basic function “ to shoot out nails. Some nail guns have other ways of attaching the nails as well.

Below I’ll talk about some of the most useful types of secondhand nail guns.

What is the difference between a brad nailer and a finish nailer?

The differences between the types of nail guns include weight, comfortable grip, type of nail used, and how the nail is loaded. The following descriptions explain these differences in detail.

Finish nailers are generally sturdier and heavier than brad nailers, which are ideal for trim applications, cabinet building, and installation of flooring. Finish nailers are also more expensive than brad nailers.

A finish nailer shoots nails up to a size of 2.5 inches in length, while a brad nailer shoots in the range of 1/4- to 2-inch length. This is due to the compressed gases used to propel the nails. A finish nailer is more powerful and generates a higher pressure than a brad nailer.

One of the important considerations is the nailer’s weight. Most nailers in the market weigh between 5 and 7 pounds. Fortunately, the trend in recent years has been for manufacturers to create lighter models. In this regard, a finish nailer is lighter than a brad nailer.

A brad nailer requires the tool to be pushed and pulled on and off a surface a number times, which can cause effort and strain. A finish nailer, instead, is used typically in a rapid-fire mode to avoid muscle fatigue. This means that when used properly, a finish nailer requires fewer strokes than a brad nailer.

Can I use a finishing nailer for framing?

In a word, yeah. But there are some caveats.

Finishing nailers generally have the shortest strokes, usually between 1 and 2 inches. This means that you have a little bit quicker cycle times and may get a few additional nails into a single charge. The lower strokes also mean that the nail will be driven a little bit closer to the surface, which is good for things like trim work.

There is a slight bit of advantage to using a framing nailer when you set in standard casing. Since casing inevitably gets cut back at some point, it’s not so much of a big deal to have the nail half an inch or so below the casing. This isn’t the case with base molding. Allowing nails to be driven too far below the surface can actually result in them landing on framing paper, making the work more of a pain than necessary.

In any case, picking up a framing nailer should be a no-brainer for any DIYer, as they can make up a considerable percentage of the framing projects that you do. The biggest advantage is that you’ll be able to position your nails faster, which means that you get to spend less time away from the cooler stuff.

Can a finish nailer shoot brads?

Nail guns have a wide variety of uses and you can place nails in almost anything using a nail gun. Brad nailers have thinner nails and are generally used for trim work with lighter materials. A brad nailer is not used to put flooring in place because a flooring nailer is better suited to that task. Furniture still requires bracing with boards and puttied joints, but the nail gun can be used to place the nails in the wood. The nail gun cannot be used to attach a paneling to existing wallboard. This is because it would cause damage to the wallboard.

What you have to take into consideration is that a brad is smaller and shoots smaller diameter nails. Each nail gun is designed for specific materials and a nail gun can only shoot the nails designed for it. You can't shoot a nail that is too thick or too long in a nail gun, and it may do irreversible damage. A finish nailer shoots a heavier nail that is used with hard materials such as wood and drywall. The nail tip is designed to flatten out and secure the material.

How far can a nail gun shoot?

Nail guns have become an excellent way to complete tasks with speed and precision. While sledge hammers still find their place for certain tasks, a nail gun takes much of the effort out of basic carpentry jobs. It’s important to understand the different types of nail guns on the market before you start using one.

The distances that a nail gun can shoot depends on the particular model of nail gun as well as the length and width of the nail. Most nail guns use .141 inch nails, but this diameter can vary. The type range from small splines to large finishing nails. The speed and force of the nail gun also impacts the distance it will shoot.

Which trigger is more dangerous on a nail gun?

Air powered nail guns are tools that you normally associate with building homes and installing the structure. The nail gun was created to speed up the construction process and to make jobs simple. To make sure that the workers were safe on the job, nail guns were invented.

The first nail gun was invented by Albert J. Richardson and was called the E-Z nailer. Richardson was from Ottawa, Canada. He created the tool in the early 1920’s in order to put up framing in a home. The nail gun was the first gun to use nails guided by a magazine. This type of gun would not fire nails unless a strip of nail had been completely inserted into the tool. The gun would not fire until the nail strip was completely inserted. This is because if a nail strip is not installed into the gun correctly and the nail gun were to be fired, the strip of nails would not allow the nail to be inserted into drywall and could cause it to shoot back at the operator.

In the past, other types of guns were developed that could shoot nails without using the strips of nails. The term nail gun is now used to contain all of these types of nail guns.

How loud is a nail gun?

Mode of Operation:

Most nail guns are powered by compressed air. There are three types of nail guns. They are classified based on their mode of operation.

Straight-acting nail guns operate in the much the same way as a pneumatic wrench or punch. With this type of gun, the piston travels along the same path as the fastener. These guns will generally have a slower nail driving speed than most other types of nail guns.

S-Acting nail guns operate in a similar fashion as a pneumatic stapler. Instead of driving the fastener with the piston, the piston is withdrawn from the cylinder each time and driven with a hammer. This allows for a speedier rate of fire. S-acting guns typically have a slower operating pressure than straight-acting guns.

B-Acting nail guns are the most common type of nail gun. With this type of gun, the piston is driven into the cylinder with enough pressure to activate the gun each time. A small spring filled compresses the nail as it is driven into the surface.

Why do nail guns double fire?

Nail guns are used for driving in small nails or fasteners to join two things together. They work by a small explosive charge, which forces air into the working end of the gun. This causes a piston to rapidly drive forward to drive a nail out of the end of the gun. At the same time, a spring returns the piston to its original position for the next shot.

Troubleshooting a nail gun can be very tricky. To begin with, nail guns are required by law to have bar-coded identification labels, which includes the name of the manufacturer, model number, device model, serial number and other consumer data. This is a Nail Gun Identification Label:

If you need to identify the make and model of the nail gun, this label is a great place to start.

If you’re having trouble getting nails to shoot through, it can be very difficult to spot the problem. If you can, remove the nail gun from the pouch and try the shots with it connected to the air hose. Run through a few nails with no problems, disconnect the nail gun and fix the problem. You can then test with air to identify the problem area.

What is a sequential trigger?

To make the nail gun more versatile, manufacturers add more features. One of the most common additional features on air nail guns is a sequential trigger. This allows you to shoot a battery of nails before you need to reload. This feature also makes it easier to blow out small debris from your work area. You just have to pull the trigger and watch the nails blast out.

You can also use a sequential trigger to remove small nails quickly. The sequential trigger will make it easier for you to take out nails before they get stuck in a wet wood. This will avoid a lot of headache later when you try to extract the tiny and stubborn nails from the wood.

This is also a great feature for professionals who work in DIY and building jobs. The sequential trigger gives you the option to change the settings between nails that are for different materials and for different applications.

What causes a nail gun to not fire?

It's important that you can identify the types of nail guns, their capabilities and capacities and understand their application. Knowing what to use the nail guns for and how to use them safely contributes to their care and ultimate longevity.

Pneumatic and air-powered nail-gun designs work similarly but differ in the mechanism that provides the air pressure necessary for operation. The more advanced pneumatic nail guns use a combination of a piston-cylinder pump and a pressure regulator to control the force with which the nail is driven into the underlying material.

With most pneumatic nail guns, tools are supplied with coiled hoses, but short lengths of rigid hose can be used to create an airtight seal should soft hose be necessary. Always check that the hose is long enough or that a rigid extension can be used to reach awkward points before work should start.