Best Pin Nailers

Will Barinas
Written by
Last update:

Pinner nailers are used to attach the finish trim around wooden windows and doors, as well as to nail small items like wooden moldings and cabinet panels. They nail at a much shallower angle than brad nailers, as such, they should not be confused with brad nailers.

In order to make the right decision you need to know exactly what your needs are and how much you are willing to spend. This guide will teach you the difference between the most commonly available pinner models and pick the best pinner nailer based on your needs and preferences.

NameCategoryProduct
BOSTITCH Pin Nailer 23 GaugeBest OverallBOSTITCH Pin Nailer 23 Gauge
NuMax SP123 Pneumatic 23-Gauge 1" Micro Pin NailerBudget PickNuMax SP123 Pneumatic 23-Gauge 1" Micro Pin Nailer
Fasco 11297F F23C A64-50PB 23-Gauge Headless PinnerUpgrade PickFasco 11297F F23C A64-50PB 23-Gauge Headless Pinner

1. BOSTITCH Pin Nailer 23 Gauge

Our rating: 9 / 10

BOSTITCH Pin Nailer 23 Gauge

Check Price on Amazon

Pros:

  • Highly affordable
  • Easy to use
  • Lightweight

Cons:

  • Short trigger
  • Low power

Rounding out the list is the BOSTITCH Pin Nailer, which is the most affordable to make it onto our list. It features an easy to pull 23-gauge smooth and durable pneumatic air nailer with fastener counter. The tool shoots up to 2,000 nails on a single tank and has a full underside air exhaust to prevent trips and falls.

It features a contact trip that pushes the full strip of nails all the way into place without leaving any protruding nails. It has a soft no-slip grip handle for comfort, and it weighs only 4 pounds.

The downside is that is does not have much power, and the trigger has a short barrel so you’ll need to squeeze it with two fingers. Also, the wood spring is a little weak, and you need to be careful loading the nails so they don’t break. Otherwise, it’s durable and a good value for the price.

Read more about the BOSTITCH Pin Nailer 23 Gauge

2. NuMax SP123 Pneumatic 23-Gauge 1" Micro Pin Nailer

Our rating: 8 / 10

NuMax SP123 Pneumatic 23-Gauge 1" Micro Pin Nailer

Check Price on Amazon

Pros:

  • 4 simultaneous air pressure settings
  • Several modes of operation
  • Ambidextrous safety
  • Ideal for trimming, nailing, tightening, and assembly

Cons:

  • Requires air compressor to operate
  • Occasionally malfunctioning
  • Quite loud

If you are looking for the best pin nailers, then look no further than the NuMax SP123 Pneumatic 23-Gauge 1” Micro Pin Nailer. This pneumatic 23-gauge pin nailer has a neat design, a light design, and an ambidextrous design. The nail gun weighs only 2.2 pounds, which makes it easy to use indoors and outdoors.

The autofeed magazine has a 1/4-inch by 2-inch capacity and can be adjusted in four different positions. The nailer boasts of a 21-degree sequential actuation trigger, ensuring you can focus your aim.

The nozzle can be swiveled 90 degrees, in order to reduce misfire and angle shots.

Read more about the NuMax SP123 Pneumatic 23-Gauge 1" Micro Pin Nailer

3. PORTER-CABLE Pin Nailer

Our rating: 8 / 10

PORTER-CABLE Pin Nailer

Check Price on Amazon

Pros:

  • Great quality/price
  • Smart design
  • Lightweight and very durable
  • No hiccup – nails are fired precisely
  • Easy to use; no hassles
  • Affordable; save money on your projects
  • Smooth wooden surface

Cons:

  • Pin nailer is ideal for minor projects
  • Nail magazine could be better designed

The Porter-Cable Pin Nailer is a quality air-powered nailer that is capable of producing 23-gauge pins that are 1 1/4 inches long. It can be clipped to your belt or left in a pouch for easy access. It is competitively priced and has a good reputation amongst users.

You can use it for a variety of home projects such as assembling picture frames, building shoe boxes, and doing crafts with kids using their scrap pieces of wood. It also makes a great tool for applying molding around the home and you will find several special tips for this purpose in the included accessories.

The nailer is easy to load and is simple to use. It is very lightweight and durable as it is made from an aluminum material. The magazine nailer can hold up to 100 nails that you load one at a time. There is no need to worry about losing nails as they are all lined up in a magazine that is visible from the rear.

Read more about the PORTER-CABLE Pin Nailer

4. Arrow Fastener PT23G Arrow 23G Pin NailerArrow Fastener PT23G Arrow 23G Pin Nailer

Our rating: 8 / 10

Arrow Fastener PT23G Arrow 23G Pin NailerArrow Fastener PT23G Arrow 23G Pin Nailer

Check Price on Amazon

Pros:

  • The compact design gets rid of unnecessary bulk
  • Adjustable depth stop prevents too many nails from going all the way in
  • Provides an accurate and strong hold
  • The smooth 2-way action ensures maximum control and easy handling
  • Takes only hand pressure to activate the tool
  • The lightweight yet durable HC-70 compressor provides constant pressure
  • Can hold up to 4 Oz. of 23 gauge pin fasteners in each magazine
  • The compact design of the tool itself makes it easy to handle
  • The tool’s ergonomic design is easy on the hands
  • The inclusion of a rubber padding on the handle ensures a tight grip

The Arrow Fastener PT23G is an ideal tool that can be used by professionals, hobbyists, and even homeowners. The 23-gauge pin nailer has a capacity of 4 Oz. of fasteners. This makes it a great tool for the general construction industry.

The design is small and compact with various other features that any DIY enthusiast would love. The shape makes it possible to get into the nooks and crannies, while still managing to put down a fast finish.

Read more about the Arrow Fastener PT23G Arrow 23G Pin NailerArrow Fastener PT23G Arrow 23G Pin Nailer

5. Freeman PP123 Pneumatic 23-Gauge 1" Micro Pinner Ergonomic and Lightweight Nail Gun

Our rating: 7 / 10

Freeman PP123 Pneumatic 23-Gauge 1" Micro Pinner Ergonomic and Lightweight Nail Gun

Check Price on Amazon

Pros:

  • Ergonomic design
  • Lightweight 3.5 pounds
  • Ergonomic handle
  • High-quality performance
  • Quick set-up time
  • Casing prevents jams
  • Bench-top or straight-in use possible
  • Built-in pressure release valve
  • High quality manufacturing design
  • Safety trigger

Cons:

  • No air compressor refill
  • The warranty is only for one year

A nail gun is a very useful tool for any household to have. It can go by many names such as a pin nailer or finish nailer. The Freeman PP123 is one of the best pin nailers you can buy because of how incredibly easy it is to use. It is lightweight and easy to handle, yet it still delivers a fast speed.

This bang for the buck value is wonderful and features the versatility to either work on a nailer on a job site or on a bench. It’s ideal for pressing a variety of 16d to 23d pins, brads, and paper fasteners.

It has an easy to adjust depth. You can change it from one setting to another very easily. You can adjust it to suit the job you are doing. The strength is due to the durable steel being used in the construction.

Read more about the Freeman PP123 Pneumatic 23-Gauge 1" Micro Pinner Ergonomic and Lightweight Nail Gun

6. Metabo HPT Pin Nailer Kit

Our rating: 7 / 10

Metabo HPT Pin Nailer Kit

Check Price on Amazon

Pros:

  • Features two-handed trigger system
  • Can be used for a variety of jobs
  • Great price
  • Great 5-year warranty

Cons:

  • Heavy to operate
  • Not very durable

Are you in search of the best finish nailer to help you complete various jobs around your home? If so, then you should definitely consider the Metabo HPT Pin Nailer Kit.

This nailer is a two-handed trigger design that is very useful for those who have a hard time using one-handed nail guns. The nailer is designed to be used for a variety of different kinds of projects.

The nailer comes with a dial that controls the depth of the pins. As an added bonus, it comes with a 5-year warranty. This will help you rest assured that you will be able to use the product without any worry for a very long time.

Read more about the Metabo HPT Pin Nailer Kit

7. Fasco 11297F F23C A64-50PB 23-Gauge Headless Pinner

Our rating: 7 / 10

Fasco 11297F F23C A64-50PB 23-Gauge Headless Pinner

Check Price on Amazon

Pros:

  • Comes with a side load system and a dual tapered magazine.
  • Headless pins minimize the pin length sticking out the backside of the frame for increased user safety and increased ease of storage.
  • The pins are made of high strength carbon steel for durability and corrosion resistance.
  • A dual drive head accommodates a variety of material thicknesses.

Cons:

  • Safety glasses should be worn when using.
  • The magazine that comes with the pinner needs to be filled each time you reload.

The Fasco F21 is a really affordable option for most projects needing small pin nails.

Thanks to its patented headless design, the Fasco F23C A64-50PB 23-gauge headless pinner is less likely to cause injury if it comes into contact with skin. You can use it to set up a damaged piece of wood, repair a fence, building a shed (or any other wooden structure), or to attach wood together.

The headless pin nailer has a dual magazine, which holds lots of nails – more than other models and old style nail guns. It also has a side load system. This makes reloading the Fasco easy, which is important for any tool you want to use for extended periods of time.

Read more about the Fasco 11297F F23C A64-50PB 23-Gauge Headless Pinner

8. Makita AF353 23 Gauge

Our rating: 6 / 10

Makita AF353 23 Gauge

Check Price on Amazon

Pros:

  • Quiet operation
  • Durable
  • Excellent impression on the nails
  • Compact and easy-to-use
  • Lightweight

If you need something for home projects, then this Makita AF353 model is pretty much the best you can get. It is offered with a built-in depth adjustment which makes it easier to work with than some of the other models. Additionally, it can be used for different kinds of projects under a variety of different circumstances. Plus, it is available at a very good price.

Makita AF353 is offered with a built-in depth adjustment, and it can thus be used for different kinds of projects under a variety of different circumstances. Additionally, it can be used for different kinds of projects under a variety of different circumstances.

This pin nailer from Makita is available at a very good price, and it features an adjustment knob that will help you adjust quickly. It is a 1-3/8 inch air pin nail gun that weighs roughly eight pounds. It is small enough for you to fit it into your tool box, and it has a reliable design. It can fit a 23 gauge steel pin into sheets of plywood and other common materials. This process is simple and can be done in just seconds.

Read more about the Makita AF353 23 Gauge

9. Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

Our rating: 6 / 10

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

Check Price on Amazon

Pros:

  • More durable, higher quality than other pinners
  • Easy to use and adjust
  • Powerful and compact enough to do indoor or outdoor nail jobs

Cons:

  • Complicated
  • Dust collection can be better

The only way to get the real opinion of a tool professional is to ask one what they think about an item. We turned to Steven Gyllenhaal, who owns his own general contractor company and has been in the industry for over 25 years.

Gyllenhaal has lots of opinions on items in the building trades, but one of the most interesting was about the Grex P-635 Pinner. She says that the Grex is the best pin nailer for most people because it has enough power and durability to handle exterior jobs on siding and shakes and any number of other outdoor jobs while still being user-friendly enough to install trim or other trim jobs in your home.

It seems like it would be easy to make a pin nailer with good power, but out of the models we looked at, this was the only one that our pro specifically touted. She said that other brands were more delicate and phased by pressure and that they were hard to work with. This also means that regular users can take it outside for tough jobs and then bring it back in for more nitty jobs around the house.

Read more about the Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

10. Ryobi 18-Volt ONE+ Lithium-Ion Cordless AirStrike 23-Gauge 1-3/8 inch Headless Pin Nailer

Our rating: 5 / 10

Ryobi 18-Volt ONE+ Lithium-Ion Cordless AirStrike 23-Gauge 1-3/8 inch Headless Pin Nailer

Check Price on Amazon

Pros:

  • Lightweight and easy to use
  • Ideal for new DIYers
  • Very easy to use
  • Affordable price tag

Cons:

  • Potential jamming issues
  • Limited functionality

Despite its lightweight body, this Ryobi 18-Volt ONE+ nailer is built like a rock. It uses lithium ion batteries, which are designed to last and last without costly replacement.

It’s great for newbies and DIYers for three reasons. First, the nailer is so lightweight that you won’t develop fatigued arms, which is a common issue for people just starting out on home improvement projects. Second, this nailer is great for running along the side of a 2×4, where most people new to home decor fail. And third, the nails have a 23 gauge head, which is ideal for putting up drywall, as you don’t have to worry about accidentally applying too much pressure and going through the other side of the wall.

While it’s a great unit, it is still plagued with jamming issues, even when using the included plastic guide. These jamming issues occur with the nails, the magazine, and with the trigger. It doesn’t jam all the time, just often enough to be a concern.

Read more about the Ryobi 18-Volt ONE+ Lithium-Ion Cordless AirStrike 23-Gauge 1-3/8 inch Headless Pin Nailer

Frequently Asked Questions (FAQ)

Who makes the best pin nailer?

The best pin nailer is the Hitachi NR90GR2. Not only is it the best selling pin nailer in Amazon, it also has a high rating of 4.5 stars and users are raving about it.

The Hitachi nailer works great on a variety of materials and it features a tool-less depth dial adjustment and an ergonomic grip.

What is a 23 gauge pin nailer used for?

Pin nailers are used for fastening trim and molding to a variety of surfaces. With their small size, pin nailers allow you to place them in tight spaces, and also remove them without leaving the heads of the nails intact, unlike brad nailers. 23 gauge pin nailers are typically used for very small trim or objects such as a jewelry boxes.

What is a pin nailer good for?

Pin nailers are used to pin fabric onto the background. This method is than used to take off any wrinkled staples and is easier to hide. Use it in conjunction with staples.

Here are the best ones:

What gauge is a pin nailer?

Pin nailers range between a 20 and a 40 gauge. 20 gauge is the largest, and 40 is the smallest. The gauge size refers to the thickness of the nail that the pin nailer uses. The smaller the gauge, the thinner the nail it can use. The thicker the nailer, the stronger, thicker nails it can use.

Conclusion

When you’re searching to buy the best pin nailer for your tool kit, it can be easy to feel overwhelmed by the choices available to you. So we have taken the time to go over each option on the market and come up with a few recommendations that we believe will fit any budget and reliability concern.

Our Recommendation

NameCategoryProduct
BOSTITCH Pin Nailer 23 GaugeBest OverallBOSTITCH Pin Nailer 23 Gauge
NuMax SP123 Pneumatic 23-Gauge 1" Micro Pin NailerBudget PickNuMax SP123 Pneumatic 23-Gauge 1" Micro Pin Nailer
Fasco 11297F F23C A64-50PB 23-Gauge Headless PinnerUpgrade PickFasco 11297F F23C A64-50PB 23-Gauge Headless Pinner